+61 419 019 993

Fast, Fully Licensed and insured, 24/7
gas plumbing
Gas Appliances
Servicing gas appliances and leaks
Read More
 
tap leak plumbing
Leaks and Blockages
We repair leaking taps and fittings saving you money
Read More
 
pipe burst plumber
Burst Pipes
No plumbing project too big or small
Read More
 
 

Hot Water Services

Pinnacle Plumbing Group is an established, fully licenced and insured, plumbing company based in Melbourne.

  • We take on both residential and commercial projects
  • Hot water repair, installation, maintenance, and more
  • Servicing areas in inner-city Melbourne and even stretching to outer suburbs.

Online Booking powered by ServiceM8

Looking For Hot Water Services?

Nobody wants to live without hot water, so if you’re:

  • Living with lukewarm showers because of an old broken down water heater
  • Have a new construction that needs hot water installation
  • Or want to keep your hot water system in good shape through regular maintenance

We can provide you with Melbourne’s highest quality hot water services. Our team of specialists have experience with all the major brands of hot water systems. This includes Apricus, Aquamax, Dux, Everhot, Rheem, Vulcan, and many more.

Our experts can help you with any of your plumbing needs. In addition to hot water services, we provide services for gas and appliances, burst pipes, leaks and blockages, and blocked drains.

Contact us today to receive your 100% free, no-obligation quote.

Call 0419 019 993

 

Types Of Hot Water Systems We Work With

Storage Hot Water Systems

The hot water is stored inside an insulated tank and is continuously heated to maintain desired temperatures. Available as both electrical and gas systems.

 

Continuous Flow Hot Water Units

Instead of storing hot water, continuous flow hot water systems only heat the amount of water required. Once the hot water tap is turned off, so is the heating. Available as both electrical and gas systems.


Not sure which type of hot water system you have? Need help deciding which to install? Click the button below to get in touch with our experts today.

 

Types Of Hot Water Energy Sources We Work With

Electrical Hot Water Heating

Electrical units are usually cheaper to buy and install. However, running costs are usually greater than gas. Since these do not require any combustion ( gas heaters), these provide residents with a greater sense of security and safety. Available for both continuous flow and storage systems.

 

Gas Hot Water Heating

These systems are usually more expensive to purchase and install. However, in most cases, gas hot water systems will be cheaper in long-term running costs than electric hot water systems. Available for both continuous flow and storage systems.


Not sure which type of hot water energy source you use? Need help deciding which to install? Click the button below to get in touch with our experts today.

Call 0419 019 993

Hot Water Maintenance Melbourne

Want to avoid costly repairs for your hot water system?

Water heaters are expensive to buy and install. But with the proper maintenance, they can last you up to 12-years.

But with heavy daily usage from washing your hands, running your washing machine, and taking your showers -- a lot of problems can occur (especially if your building has hard water!)

Whether you use a storage system or a continuous flow system, it’s recommended you get it serviced at least once a year and twice a year if possible.

With regular hot water unit maintenance you can:

✓ Decrease risk of burns from faulty safety devices in your system

✓ Flush out any build-up of calcium in your heater (especially important if you have hard water)

✓ Increase the efficiency of your heater and save in running costs

✓ Prevent premature replacements due to damage from lack of maintenance

✓ Avoid nasty cold showers or leaking water tanks

Looking for hot water maintenance in Melbourne? Contact us today for a 100% free quote.

Call 0419 019 993

Hot Water Repair Melbourne

Skipped out on your hot water maintenance and have issues with your hot water?

While we highly recommend that you regularly maintain your hot water system with yearly or even half-yearly maintenance services -- we also understand that it’s too easy to forget or ignore. After all, it’s much easier to worry about something once a major issue pops up.

But don’t worry, there’s a good chance whatever problem your facing can be repaired. In most cases, you won’t need to purchase an entirely new system to install.

Here are 5 common hot water problems:

  • Lack of cold water even though your water heating system is switched on
  • Inconsistent water temperatures ranging from scalding hot to icy cold
  • Unexpectedly expensive gas or electricity bills, for no apparent reason
  • No water at all when you turn the hot water knob
  • Water leaking out of your hot water heater and flooding your home

Do any of the above situations sound familiar to you?

A variety of problems could be causing this. For example, your pilot and burner may need cleaning, sludge may have built up, valves may need replacing, and a whole list of other possibilities.

Get in touch with our team of experts today to book an inspection where we’ll pinpoint the exact causes of your hot water problems. If possible, we’ll repair it on the day and have you enjoying nice warm showers the very same night.

For hot water repairs or replacements in Melbourne, call the number below today.

 

Hot Water Installation Melbourne

Moved into a new home and thinking about replacing an existing old and dodgy water heater?

Or maybe you’re constructing a new building and need a commercial hot water solution installed.

At Pinnacle Plumbing we provide hot water installation services to all of Melbourne. Our team has experience installing every type of hot water system for both residential and commercial buildings all across Melbourne.

We can install:

✓ Continuous flow systems

✓ Storage hot water systems

✓ Gas hot water heating

✓ Electrical hot water heating

✓ And more...

We recommend only the highest quality brands to our clients. Depending on your budget and needs, we can help you choose the right system for your property. Our experts take into consideration factors such as:

  • Your existing gas pipes
  • Water pressure
  • Regulations and certification requirements

Ready to have a new hot water system installed in Melbourne? Contact us today for a 100% free, no-obligation quote today.

Call 0419 019 993

Why Choose Us

Looking for a professional hot water service in Melbourne?

We are an established, fully licenced and insured plumbing company in Melbourne. Homeowners and commercial project managers from Melbourne CBD, Richmond, Kew, Toorak, Abbotsford, Collingwood, and an endless list of surrounding suburbs trust us for their plumbing and hot water needs.

On top of hot water services, we also offer sewer, storm water drainage, gas, and drain services. With our experience across all things plumbing, you too can trust us to handle your job.

Our mission is to provide you with a fast, reliable, and cost-effective service.

Have an emergency?

To minimise the damage to your property and equipment, we have a maximum 2 hour response time for all emergency plumbing work.
Get in touch with Pinnacle Plumbing for a 100% obligation free quote today.

 

Other Services Offered

Not looking for hot water services? Have a look at our other offerings.

Gas & Appliances

 Burst Pipes

 Leaks & Blockages

 Blocked Drains 


Areas We Service

We offer hot water services across all of Melbourne. This includes the CBD, Richmond, Kew, Toorak, Abbotsford, Collingwood, and many more areas.

Call 0419 019 993 today to book your hot water service.

 

Frequently Asked Questions

#1. What is the difference between water heaters and boilers?

Both water heaters and boilers are used to heat water. Water heaters use gas or electricity (depending on the unit installed) and then stores this in the tank. Unlike water heaters, boilers are actually used to heat buildings. By boiling the water and turning it to steam where necessary, boilers can heat the air and floors.

#2. What are the differences between an electric and a gas water heater?

Gas and electric heaters are the two most popular hot water units. The main difference between the two is the heating method, as their names suggest.

Often times, gas heaters are more expensive to run than electric heaters. However, depending on your electricity and gas pricing -- this may not be the case for you.

One advantage of a gas heater is that they don’t require electricity. Even if you experience a blackout, you’ll be able to get hot water.

Not sure which one is right for you? Contact our team and we’ll advise you on the right choice for your building. Click here to get in touch.