OUR COVID 19 POLICY: Our priority is the health, safety and wellbeing of our customers, our staff and our communities. We are complying with all current government health and safety obligations.

Blocked Toilets – Home Remedies

Blocked Toilet

Clear a Toilet Clog with Dishwashing Liquid

 ½ – 1 cup dishwashing liquid
 1 pair of rubber gloves
 1 bucket of hot water

Pour the dish soap into the toilet drain, and let it sit for at least twenty minutes. Then, carefully pour the water into the toilet bowl. If the water backs up, wait until the water level recedes before continuing. Repeating the process several times may be necessary to clear the blockage.

Coca-Cola® Drain-Unclogging Method

 1 20-ounce bottle of Coke®
 1 pair of rubber gloves
 1 bucket of hot water

Put on the gloves, and pour the entire bottle of Coke® into the drain. Let it sit overnight. The next morning, pour the water into the toilet bowl. Flush the toilet.

Repeat if needed. Make sure to send the water through at the end to avoid pipe corrosion.

Make a Homemade Cling Wrap Plunger

 1 roll of standard plastic cling wrap
 1 pair of rubber gloves
 1 bucket of warm water

Wearing the gloves, stretch sheet after sheet of cling wrap across the top of the toilet bowl. Completely cover the top of the bowl – there must be a good seal for the plastic wrap to work correctly.

Press down sharply on the cling wrap over the centre of the bowl with enough force to push air downward but not so much as to tear the plastic. Repeat the motion until the clog dislodges.

DIY Toilet Snake

 1 pair of rubber gloves
 1 medium-sized rag
 1 wire coat hanger
 1 pair of pliers
 1 roll of duct tape

Use the pliers to untwist the wire hanger, and twist one end of the wire into a loop to serve as a handle. Wrap the rag around the other end, and secure it with duct tape. Wearing the gloves, carefully manipulate the snake’s rag end down the toilet drain.

Twist the wire, and exert steady pressure. Pull the snake out every once in a while, and remove and discard any debris from the end. Continue until the clog dislodges.

Commercial Plunger Method

 1 toilet plunger
 1 pair of rubber gloves
 Paper towels or rags

Put on the rubber gloves, and place the towels or rags around the toilet in case of spills. Place the plunger head into the toilet drain, and slowly push downward with steady pressure to create a vacuum seal.

To plunge a toilet, push the plunger up and down with a straight up-and-down motion. Do not force the plunger at an angle – doing so will break the seal. Repeat until you dislodge the blockage.

If after all your efforts your toilet is still blocked please call Pinnacle Plumbing

Shower looking a bit Shabby?

An entire shower re grout can usually be finished in about a day and we would recommend not to use the shower for 24 hours to allow the grout and sealer to dry.

Once we have removed the old grout and dusted out the remaining loose grout we will then apply new grout to the tile.

Excess grout or grout haze will then be removed from the tile with a sponge or soft cloth.

The grout in your shower should always be sealed, this will block any moisture that could easily enter the very porous material. A sealer will prevent water from becoming stuck behind the tile and grout, forming mould and mildew

When grout is not sealed in time, grime and water can seep into it, causing cracks on your tiles and forcing them to break at a certain point. By sealing your grout, you get to prolong your tile surface’s lifespan and minimise damage to a considerable extent.

While our plumber is onsite why not upgrade your tapware and shower head to create a whole new look?

What to Do If a Pipe Bursts at Your Property?

Burst Pipe Repair
The first thing to do is Turn Off Your Water supply

Conduct a Quick Inspection. If possible, try to identify where the burst water pipe leak is coming from, even if it is just a general area

Call a plumberPinnacle Plumber has an emergency 24/7 response

If the pipe is inside your property, clear away any water quickly to avoid excess water damage

Water damage

If you have wet flooring, carpets etc bring in Professional Dryers to avoid mould and dampness

Professional Dryers

Prevention is better than cure!! (so the saying goes)

blocked sewer
Coming home to a blocked sewer is not a pleasant experience.

As you can see from the photo raw sewerage coming back up through the bath, shower and toilet and flooding the house, is very unpleasant and also expensive.
Ruined carpets and fixtures, furniture and belongings.

Getting a plumber to clean the sewer pipes on a 6 monthly basis is the best way to prevent serious problems from occurring. We can also do a CCTV camera inspection to let you know where the problem areas are.

Any sign of gurgling and slow drain toilets, baths, showers and sinks can be a sign that sewer pipes are blocked from tree roots and debris.

Bust Pipe Repair

It’s much better to be safe than sorry and avoid this nasty surprise happening to you.

Blocked Drain

Top Tips for Clearing Blocked Drains in Melbourne

One of the most common and infuriating problems one encounters in the home is a blocked drain. If not dealt with right away, it can cause water leaks and damage your home and property.

Blocked drain signs

  • Foul smell
  • Overflowing pipes
  • Gurgling sounds
  • Slow drainage

Common causes of blocked drains

  • Tree roots
  • Toiletries
  • Cooking oil
  • Foreign objects
  • Scraps of food
  • Build-up of minerals
  • Soap
  • Cat litter 

DIY Tips for clearing blocked drains (though a plumber is the best option)

  • Boiling water: For blocked drainspour a pot of boiling water in the drain. In most cases, this will dissolve and loosen the blockage without you having to call in a plumber near meThis method works with ceramic and metal pipes, not PVC.
  • A natural cleaner: When faced with blocked drains in Melbourneyou can try a DIY cleaner of drains with white vinegar and baking soda. First, pour the baking soda into the drain and follow it up with vinegar. The mixture may bubble out of the pipe, so cover it. Oxygen is produced in this reaction which cleans out the insides of the pipe.
  • Caustic cleaner: Visit your local hardware store for a caustic drain cleaner to dissolve common blockages like food, grease, and hair. These cleaners are bad for the environment, so use them very sparingly. With a blocked toiletcaustic cleaners achieve good results, but make sure to use gloves and a mask when using it. Later, flush the toilet a couple of times to get rid of any lingering chemicals.
  • Plunger: Plungers are very good for clearing blocked drains. The up-down motion of the plunger will loosen blockages, getting your pipe back to normal. However, you have to remember that plungers are not effective for mineral deposits or grease deposits.
  • Hydro-Jet: This is one of the most effective ways to clear a blocked drain. The powerful water stream from hydro-jet forces the blockage to move out of the pipe, but not solid blockages. It is in your best interests to hire a plumber for this method of drain blockage clearing.

All the above methods are effective in their ways in which they clear blocks in drains. For the best results, look for a plumber near me to help you out with blocked drains.

Tell-Tale Signs You Must Change Your Hot Water System

Hot Water System

You rely on your hot water system much more than you realize. Apart from bathing, you need hot water to cook your meals and house cleaning. A hot water system requires maintenance regularly, but often this is ignored until the day a problem arises with it.

Keep an eye on the following 5 signs to know when you have to replace your hot water system:

The water is not heating

The water, not heating, is an obvious indication that all is not well with the water heater. If there is only lukewarm water or cold water issuing from the water heater even when it is on, it is time to replace it with a new one. Search for a “plumber near me” to check it and thereupon, get it replaced or repaired.

The system’s age

Any average water heater lasts for ten years at most. Some factors influence it like the number of family members, frequency of use, heater maintenance. In most cases, the water heater lasts for 8-12 years. If the water heater has reached the 10-year mark, you may want to go for hot water system replacement in Melbourne. This will avoid a situation of calling an emergency plumber in Melbourne when the water fails to heat.

Noise, smell, and rust from the water or the tank

If you find rust in the pipes coming from the water heater, or if the water tastes or smells metallic, it is time to go for a water heater replacement. Again, you might find unusual noises issuing from the heater. Avoid delaying and call for a plumber to check the system because you need a hot water system replacement.

The tank leaks

One of the problems that cannot be repaired is a leaking tank. If you spot water leaking, ask for an emergency plumber in Melbourne to block the leak for the time being while you plan for a hot water system replacement.

Constantly needs repairs

If problems with the water heater plague you constantly and you need to frequently ask for a “plumber near me” it is an indication that you need a hot water system replacement.

Keep an eye for these 5 signs to ensure that you service the water heater regularly for its efficient and long life.

Which is better- gas hot water system or an electric one?

Water Heater System Melbourne

If you have plans to upgrade the water heater for your house but are unsure as to which is better – a gas system or an electrical one, we have put forth the advantages and disadvantages of both, so that you can make an informed decision.

Water heating speed

With a gas hot water system, water will certainly heat faster than an electrical system. If you are an impatient sort, and loath to wait for the water to warm up, then go for a gas hot water system in Melbourne.

The water heater size

Water heaters come in sizes of 20 litres to 200 litres. The usage, number of household members, and available space will decide the type of water heater. As far as a gas hot water system is concerned, less space will be required outside for the unit.

Energy efficiency

Operating a gas hot water system in Melbourne may cost less; however, in terms of energy efficiency, it lags behind an electrical hot water system. A gas hot water system loses some heat in the form of vented gas. On the other hand, an electrical system is efficient and utilizes all of the generated heat to warm the water.


When you use a gas water heater system, there is the risk of leakage of gas leading to an explosion, and even carbon monoxide leakage in your house. These risks can be avoided with regular servicing. However, an electrical water heating system is much safer.


While the initial cost of a gas water heater system in Melbourne is more than that of an electrical system, along with higher installation costs, but the running costs are lower. With a gas water heater system, as opposed to an electrical system, there are fewer chances of having to call an emergency plumber in Melbourne.

With these tips, you can choose the right water heating system for your home and ensure that there is always hot water on call for your needs.

Why You should Only Hire Plumbers who Give a Certificate of Compliance

Why You should Only Hire Plumbers who Give a Certificate of Compliance

Water is so vital for our survival that having experienced and professional plumbers are now just as important as the water flowing through our pipes!

Plumbers install and maintain the domestic and commercial pipeline systems that bring us potable water and natural gas.

As homeowners, this is a significant priority for all of us since it is not only convenient but will also keep us healthy and safe.

You can easily find a plumber wherever you are in Australia.

You can take your pick from the neighbourhood all-around handyman to professional plumbing contractors and everyone in between.

To help you choose, look at your plumbing project and match it with the experience level of the plumber and your budget as well. Do they have 24/7 emergency plumbing services available? Do they give a warranty? The criteria for choosing is endless.

However, a non-negotiable factor for choosing a plumber is that whoever you hire should furnish you with a Certificate of Compliance once they have completed your project.

You might have to pay extra for this, but it is worth it the end to give yourself the peace of mind you deserve.

It shows that the plumbers you hire are a fully licenced and insured plumbing company and can pass industry and government standards.

Why is a Certificate of Compliance Important?

A Certificate of Compliance is a document licensed plumbers need to submit to you and the Victorian Building Authority (VBA) for work done on your property.

This includes water-related work, gas projects, sewer and drainage issues as well as any job worth of $750.00.

The Certificate of Compliance is essential. It acts as proof and a guarantee that all the work they have completed falls within and complies with the plumbing rules, regulations and standards in the state of Victoria.

If your plumber fails to submit a Certificate of Completion, he can get penalised, and you will have to deal with far-reaching consequences as well.

You might not be allowed to move into your home, or even worse, if the completed job is not up to standard, you could have a bigger problem in the future.

Certificates of Compliance given out for the following services:

  • Water Supply & Connections
  • Water Heater (Solar) systems
  • Drainage
  • Natural Gas Fittings
  • Roof & Stormwater-related Work
  • Fire Protection (Sprinkler systems)
  • And many more

A Guarantee of Excellent Plumbing Work

Choosing a professional and certified plumber might be a little harder on the budget, but homeowners and business owners will save so much more in the long run by receiving the best work possible.

Only the Victorian Building Authority (VBA) can issue a license to any professional plumber working in the state.

Licensed plumbers are usually the best of the lot, often with years of experience and training.

It is mandatory to submit a Certificate of Compliance if you are a licensed and registered plumber in Victoria.

If your plumber is not able or is hesitant to give you a Certificate of Compliance, we advise you to find a new plumbing company.

Your property could be at risk if your water systems are not installed or maintained correctly.

You might even land in hot water with your local building standards office or your insurance company as well.

Most insurance companies require the Certificate of Completion for their records, especially if you have recently purchased home insurance from them.

Contact us for all your plumbing needs!

A Certificate of Completion is your plumber’s guarantee that his work is of the best calibre and also within industry standards.

Make sure you hire a licensed plumber you can trust.

If you need an experienced and professional plumber capable of submitting a Certificate of Completion, contact Pinnacle Plumbing today.

We can handle all kinds of plumbing services for your home or business. We also have 24/7 Emergency plumbers on call to handle any emergency.

Who We Are

Pinnacle Plumbing Group is an established fully licensed and insured Plumbing Company servicing inner city Melbourne, stretching to outer suburbs.

License No: 50092

Verified Google Reviews

Eleni Endt
Just easy to deal with, reasonable prices
Stewart Webb
Sam Nelson
Toilet flusher broke on me this morning. Communication with this company was great! Nick reached out to me first with a rough timeframe when someone would be around (same day). That someone was Gary, who first called asking for more details and I was I was able to provide photos. He gave me a more specific timeframe for his arrival, which he stuck to, and then he showed up with all the parts and tools he needed on hand, knowing exactly what needed to be done, no surprises. He was fast, professional, friendly, and cleaned up everything when he finished. Highly recommended! Cheers Gary!
Tim Mckillop
Balcony Reseal Matt was amazing very thorough job. Did 3 coats Very punctual & polite.
Amit Shahi
Had a problem with my toilet leakage. Matt came , diagnosed the problem and fixed with ease in no time. Thanks Pinnacle Plumbing for your quick response. Awesome service!! Cheers to Matt!!
Soniya Bendre
Matt visited our residence and fixed the issue in almost no time. He was friendly and was quick to diagnose and fix the problem. Great service !
Mukendu Annu
Garry was here to fix the tap. Was amazing and swift with his work. Absolute professional.
Genevieve Brady
Gary was punctual and did a great job. Would highly recommend!
Tonia Martin
My hot water service was leaking. It was removed and replaced in just a few hours. Great service
Emma & Tom
We called Pinnacle Plumbing when we discovered a very serious water leak at our house, and we happily recommend them to anyone in Brunswick East and the surrounding suburbs. Despite contacting them after hours, Jay arrived within half an hour of my call and was able to quickly identify the problem, prevent it from becoming a total disaster, and tell me what needed to be done. Jay and Gary were back at 7am the next day, and within a few hours they had found the source of the leak (which was hidden underneath concrete slabs) and fixed it. They also tidied everything up beautifully. They are both lovely, and we will definitely use Pinnacle for any future problems and will recommend them to our friends. Thank you Jay and Gary!